HOME

Sure Flow Vibrators/Kits

Omega Motor Controllers

Power Switches

Motor Transmission Coupler

CogWell GearBox

DC Motors

Rhino Harness Systems

Policies

Contact Us

View Cart



OMEGA MOTOR CONTROLLERS
OMEGA SALT SPREADER MOTOR CONTROLLERS
Our Omega 1030 and 2070 salt spreader motor controllers offers a combination of performance, protection and durability that is unmatched in an industry riddled with burnt out motor controllers.

CLICK HERE TO ORDER
Omega salt spreader motor controls offer state of the art features to give your salt spreader the "Power to Perform." Every controller is packed with features like "Guardian" circuit protection, reverse polarity protection, blast and an unmatched 10,000Hz PWM that delivers super efficiency. Because salt spreaders are only as good as the controller that drives them, both models are specially designed with "Hard Start" algorithms, like "Jack-Hammer," to provide more consistant salt spreader start-ups all for a price that can save you hundreds.

Electric salt spreads are basically built in two different designs; single stage with only one motor and two stage with independent spinner and material feed motors. That's why, Omega salt spreader controllers are available in two specially designed models. There is an Omega to power every type of electric salt spreader driven by a permanent magnet motor on the market. They come with a 2 year warranty.


SALT SPREADER COMPATIBILITY CHART

OMEGA 1030

The Omega 1030 is designed to operate every single stage plastic tailgate spreader on the market and delivers up to 60 amps of start-up current in a pulsing "Jack-Hammer" algorithm to get your spinner started even if you're running bulk salt or a salt/sand mix. Nominal operating current is 30 amps and is fully protected by "Guardian" circuit protection to give your salt spreader the "Power to Perform" without ever overloading your system or burning out the controller.

The Omega 1030 comes with input and output connectors to mate with the "Rhino" 1030-04 harness. Model specific pigtails are available to make it a drop in replacement controller for the Curtis Fast-Cast 2000 and Snowex 575 & 1075 tailgate spreaders. For all other salt spreader models we offer a generic pigtail, so you can easily convert your existing wiring harness to plug into the Omega 1030. Pricing for the optional pigtails and complete "Rhino" harness is available at the bottom of this page.

A new OEM controller can easily cost you $200.00 more than an Omega 1030.

Requirements: Not less than 10 AWG GXL insulated chassis wiring harness with positive and negative wires from the controller to the motor.
Recommendations: Rhino model 1030-04 complete plug-n-play wiring harness with silver plated controller connector contacts. Rhino Wiring Harnesses


OMEGA 2070

The Omega 2070 is a real work horse and is designed to deliver "Hard Start" current to get your two stage salt spreader started even if you're running bulk salt, salt/sand mix or straight dry sand. Nominal operating current to the spinner is 30 amps and 60 amps to the material feed motor and is fully protected by "Guardian" circuit protection to give your salt spreader the "Power to Perform" without ever overloading your system or burning out the controller. If the materieal feed auger jams the Omega 2070's "Auto-Clear" feature goes into action to help clear the jam.

The Omega 2070 comes with input and output connectors to mate with the "Rhino" 2070-06 harness. Model specific pigtails are available to make it a drop in replacement controller for the 1875, VeePro, V-Maxx and Salt Dogg two stage, poly hopper salt spreaders. For all other salt spreader models we offer a generic pigtail, so you can easily convert your existing wiring harness to plug into the Omega 2070. Pricing for the optional pigtails and complete "Rhino" harness is available at the bottom of this page.

A new OEM controller can easily cost you $200.00 more than an Omega 2070.

Requirements: Not less than a 10 AWG GXL insulated chassis wiring harness with independent positive and negative wires from the controller to the motors.
Recommendations: Rhino model 2070-06 complete plug-n-play wiring harness with silver plated controller connector contacts. Rhino Wiring Harnesses


ADDITIONAL TECHNICAL DATA

OMEGAS FOR THE OEM

New higher performance Omega controllers are available to OEMs to help bring larger capacity salt spreaders to market faster. Single and two stage controllers up to 170 input amps are available for your next generation salt spreader.


ACCESSORIES

Pricing for all accessories can be found by selecting the accessory from the drop down menus below, then click "Click for Pricing."


Get A FREE Control For Your Engine Driven V-Box Salt Spreader?

Karrier Company is giving away a new controller for an engine driven V-box salt spreader. To qualify for this offer, you have to send us a burnt out controller from an engine driven V-box spreader with your name, address, phone number and the brand and model spreader your old controller came off of. Also, you have to tell us what features you want in a new Omega controller. We'll use the information you give us to design a new bullet proof, state of the art, controller and the winner will get one free to power their spreader when we go in to production. Please call 800-709-4434 with questions. Good Luck Gentleman!


POWER UP WITH A COMBO PACK AND GET AN INSTANT $70 OR $110 REBATE OR GET A 50/50 PAYMENT PLAN

Combos Includes:

  • Single Stage: Omega 1030 Controller, Rhino 1030-04 Harness and Standard Sure-Flow Z-80 Vibrator.
  • Two Stage: Omega 2070 Controller, Rhino 2070-06 Harness and High Performance Sure-Flow Z-200 Vibrator.
  • 1875 Sand-Pro: Omega 2070 Controller, Rhino 2070-06 Harness and Standard Performance Z-80 Vibrator
  • Karrier is pleased to offer a $70 instant rebate on the Single Stage Combo Pack and a $110 instant rebate on the Two Stage and 1875 Sand-Pro Combo Pack or take the 50/50 payment plan. With the 50/50 payment plan, take delivery now and we'll charge your credit card half now (plus shipping and any applicable sales tax) and the other half in 30 days.

    This offer is available for a limited time to customers that make their purchase on this website. By taking advantage of the 50/50 payment plan you authorize Karrier Company, LLC to charge your credit card in 30 day from the date of purchase for the balance of Combo Pack(s) purchased. Merchandise returns for credit must be post marked within 3-days of receipt. Returns for credit are not accepted if the product has been installed or is damaged. All 50/50 transactions receive free freight insurance courtesy of Karrier Company, LLC.


    Give your salt spreader the "Power to Perform" with an Omega controller from Karrier Company. You'll love the way we make your spreader work!


    If you need further assistance please call the number below or Click here to email the Sales department.

    Sure-Flow Vibrators, Rhino Harness Systems and Omega Motor Controllers are true performance parts for salt spreading equipment.
    You'll love the way we make your salt spreader work!

    © Copyright 2012 Karrier Company
    1065 S. Liberty Ave.
    Alliance, OH 44601
    Phone: 330-823-9597
    Fax: 330-821-0741