[Home] [Industrial Vibrators] [DC Motors] [DC Blowers]
[Gearboxes] [Tarp Roll-up Equipment] [E-mail Karrier Company]

Phone 330-823-9597 Fax 330-829-9001



Brush Type DC Motor Sample Request Form

Company Name

Contact Name
E-mail

Street Address
City, State, Zip

Phone - FAX -

Describe your product

Actual Motor Load (fan, actuator, gearbox, etc.)

Motor Series (See Specification Chart for Series Number) 2000 Series 2020 Series 2030 Series 2040 Series 2060 Series 2070 Series 2080 Series 2520 Series 2530 Series 2540 Series 2560 Series 2570 Series 2580 Series 3000 Series 3020 Series 3030 Series 3040 Series 3050 Series 3060 Series 3070 Series 3080 Series 3090 Series 4000 Series 4020 Series 4040 Series 4060 Series 4080 Series
Number of Sample Motors required for Testing

Voltage To Motor Speed Controlled

Pure D.C. ; Full Wave Rectified ; Electronic Controller

Performance Required: Load Speed (RPM)
Load Torque (Oz.In.)

Duty Cycle: Continuous ; Intermittent : Time On ; Time Off

Ambient/Environmental Operating Conditions

Hours of Brush Life Required Replaceable Brush: Yes; No

Ventialtion Allowed: Totally Open ; Partially Open ; Totally Closed

If Partially Open, Please Describe?

Rotation Required, Lead End(red +): CW ; CCW ; Reversible

Shaft Material Required ; Lead Material Required

Lead Color(Red +, Black -): Positive ; Negative

Bearings Required:
Lead End: Shielded Ball ; Sealed Ball ; Fixed Sleeve ; Self-aligning Sleeve
Opposite Lead End: Shielded Ball ; Sealed Ball ; Fixed Sleeve ; Self-aligning Sleeve
Loctite Bearings (Ball Only)? (recommended for heavy vibration applications) Yes; No

Lead Length: Positive ; Negative

Termination: Positive ; Negative

Lead Exit: Out End Frame ; Out Periphery(shown below)

Motor Dimensions


A: B: C: D:

E: F: G: H:

Register Diameter: Lead End ; Opposite Lead End

Casebolt Extensions: Lead End ; Opposite Lead End
Does the application require the casebolt heads and nuts not to exceed
flush to the face of the end frame? Yes; No

Mounting Studs: Lead End ; Opposite Lead End
Mounting Stud Bolt Circle

Electro-Mechanical Brake:
Does the application require an electro-mechanical brake to be attached to the motor?
Yes; No If yes, please provide torque requirement (Inch Pounds).

Brake Used For: Holding ; Dynamic

Would you like Karrier Company to provide the brake attached to
the motor? Yes; No If no, please provide brake drawing(Autocad 14 format).

Would you like a boot to cover the brake and a portion of the motor? Yes; No

Project Data:
Est. Annual Volume ; Production Start Up Date

Target Price

Are You Developing A New Product
Or Looking For A Replacement For Current Production
If replacement, can you provide a sample of the motor currently being used? Yes; No

Additional Comments


Submit to engineer@karrierco.com

Let me start over